Vanguard Miniatures - 3, 6, 15 et 28mm

fokjmymèt fokjmymèt,....
mais il y a le projet Grimdark Futur qui est venu s'incruster dans mon backlog...

Change de scrum master...

Eloi Federation – Typhoon Heavy Tank




To give you a sense of scale:

Typhoon Heavy Grav-tank
The Typhoon is the Eloi Federations heaviest anti-gravity combat vehicle encounter to date. A swift and highly manoeuvrable vehicle for its size it combines unprecedented mobility with lethal and highly accurate firepower.
Typhoon’s are known to be crewed by two Eloi, a pilot/driver and a weapons operator both of which sit in the small rear compartment. The apparent central cockpit is in fact a highly advanced sensor array, real time data gathering module and terrain following suite linked directly to the crew by a neural linked helmet interface. This gives both crew members unprecedented situational awareness of their surroundings on the battlefield.
The turret armament consists of two heavy laser cannon with a secondary centrally mounted rail gun sitting between the barrels. However two other weapons systems have also been observed on this chassis, a large long range energy weapon (the quantum lance), and a triple barrelled indirect fire weapon (the trinity plasma mortar).
The graceful curvature and the thick well slopped composite armour plates of Eloi vehicles provide excellent protection from enemy fire but it is the tanks speed and agility that is considered to be its primary defensive measure.
Set contains:

1 x heavy tank hull

1 x Twin heavy laser cannon turret

1 x Quantum lance turret (with 3 sponson options)

1 x Trinity plasma mortar turret

Notes:

This is a fully resin cast set
Model approximate dimensions, length 75mms, width main hull 42mms – across the stabiliser fins 50mms, height around 10mms not including turrets

https://vanguardminiatures.co.uk/shop/el...eavy-tank/

Several new releases today.

Cybershadow Fleet – Destroyers

Set contains:

2 x Destroyer hulls (2 variants, gun batteries and fighter launch bays)

1 x Components sprue

1 x Turrets sprue

Notes:

These are resin cast models
Model length 31mms

https://vanguardminiatures.co.uk/shop/cy...estroyers/

Renegade Fleet – Logistics Carriers

Renegade Logistics Vessels (even the bad guys need logistics support)

Set contains:

1 x long hull

1 x short hull

3 x prow options (fit both ships)

1 x components sprue

2 x cargo pod sprues

Notes:

These are complete resin cast models
Model lengths, 70mms and 50mms
The cargo pods are the same as on the Novan Logistics carrier

https://vanguardminiatures.co.uk/shop/re...-carriers/

3mm Skinners – Rocket Tanks

Skinners tank with rocket turrets

Set contains:

8 x tank hulls (4 variants)

8 x rocket turrets (4 variants)

https://vanguardminiatures.co.uk/shop/3m...ket-tanks/

Tower Roof

A solid resin cast tower rooftop formerly available as part of the Habitorum plastic tiles set, now available separately.

1 x resin dome

Notes:
1. Base 50mms square, height 55mms

https://vanguardminiatures.co.uk/shop/tower-roof/

New Elites out!

Novan Elites B – Recon Teams

Novan Elite Recon Teams

Set contains:

4 x squad leaders

4 x comms operators

33 x recon troopers

2 x prone snipers

2 x troopers sat down taking cover (2 x wall debris pieces to take cover behind)

https://vanguardminiatures.co.uk/shop/no...con-teams/

New printed terrain out!

So many moons ago Troublemaker Games did a Kickstarter campaign for 3D printable terrain. Now Vanguard Miniatures is stocking some of those items, selling them as printed items (no need to ask for STL's here).

Small Gas Tanks

Set of four different small gas tanks compatible with Troublemaker Games plastic terrain sets

Notes:

-Resin printed product
-8mm tall infantry figure show for size purposes only

https://vanguardminiatures.co.uk/shop/small-gas-tanks/

Roof Top Vents

Set of four different roof top vents compatible with Troublemaker Games plastic terrain sets

Notes:

-Resin printed product
-8mm tall infantry figure show for size purposes only

https://vanguardminiatures.co.uk/shop/roof-top-vents/

Eloi reinforcements inbound!

Eloi Federation – Grav-bike Squadron

The Eloi are masters of anti-gravity technology with the majority of their military vehicles employing anti-grav technology, the Grav-bike is one of the smallest produced, a one person skimmer capable of very high speed utilised as a recon and light raider asset.

Set contains:

12 x grav-bikes

6 x rail cannon grav-bikes

1 x squadron leader grav-bike

1 x Way Seeker grav-bike

Plastic stands not included.

https://vanguardminiatures.co.uk/shop/el...-squadron/

[Reldan]

Ca commence à être pas mal les eloi. Il manque encore de quoi faire 1 ou 2 types de guerriers aspect, des gardes ou seigneur fantômes et 1 type de vaisseau . Et après je n'aurai plus d'excuse
en plus on sera en 2022.

Ca commence à être pas mal les eloi. Il manque encore de quoi faire 1 ou 2 types de guerriers aspect, des gardes ou seigneur fantômes et 1 type de vaisseau . Et après je n'aurai plus d'excuse
en plus on sera en 2022.

Si jamais tu as accès à une imprimante 3D ou bien "imprime ton truc" ou autre service du genre : https://cults3d.com/en/users/Lord_Chronos/creations
Les guerriers Scorpion arrivent et il a déjà une gamme vraiment bien foutue pour cette échelle. Ça devrait compléter un peu ta liste =).

A bunch of new releases!

Novan Regulars – Siege Troops Casualties

Casualty figures that can be added to bases to create little vignettes and or for making 3D damage/wound/suppression markers, or anything else you can think of.

Set contains:

4 x casualties sprues (24 x figures in 6 poses)

1 x Quarter master team sprue (4 x figures)

28 x figures in total

https://vanguardminiatures.co.uk/shop/no...asualties/

Novan Regulars – Siege Troops Tank Riders

These figures are designed to add to tanks and or trucks etc as transported troops.

Set contains:

1 x command sprue( kneeling/crouched)

2 x troopers sprue (kneeling/crouched)

1 x troopers sprue no rifles (sat down)

4 x troopers spues with rifles (sat down)

30 x figures

Note:

Please note that due to the nature of their use these figures can be incredibly fiddly to work with and fix to your models so some patience is required to work with these figures. Contact patches for gluing the figures for example are very small so thy may be easily dislodged with heavy handling. I would suggest using them on a special spare model so that model can be added to a formation to visually note that troops are being transported on the vehicles, remove once the troops re deployed.

https://vanguardminiatures.co.uk/shop/no...nk-riders/

And some 3mm reinforcements for the Skinners:

3mm Skinners – Flamethrower Tanks

Skinners tank with flamethrower turrets

Set contains:

8 x tank hulls (4 variants)

8 x flamethrower turrets (4 variants)

https://vanguardminiatures.co.uk/shop/3m...wer-tanks/

3mm Skinners – Beam Cannon Tanks

Skinners tank with beam cannon turrets

Set contains:

8 x tank hulls (4 variants)

8 x beam cannon turrets (4 variants)

https://vanguardminiatures.co.uk/shop/3m...non-tanks/

[FAM]

Ca c'est vraiment génial