HOKUTORAMA

293 réponses, 58735 vues


[Image: _DSC3779.JPG]

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">


Bonjour à tous,




Aujourd'hui, le socle démoniaque. Alors rien de très compliqué mais pas mal de temps à cause des différents essais. Commençons par le début, moulage du socle 40 mm, petit coup de peinture noire dessus. Ensuite la création du crâne avec du Miliput et en parallèle perçage du trou pour l'emplacement de la pile et de la Led.


L'étape suivante consistait à mettre en place des aimants néodymes sous le socle pour obtenir un champ magnétique. Un peu de poudre de fer que l'on soupoudre par dessus et voilà que pleins de pointes apparaissent. Ensuite ils faut les mettre un peu en place, rajouter un peu de poudre ici et là, et le tour est joué. Et c'est à ce moment là, que l'on me dit mais si tu enlève les aimants, bye bye les piques... hiiii oui tout à fait! C'est pour ça qu'il faut déposer de la superglue ou de la colle plastique avec précaution pour ne pas entrecoller les piques. Ce chantier achevé, on passe à la mise en place du crâne et l'incorporation de la Led (led oscillante récupéré dans une bougie), on colle le tout. Puis on ajoute du gel liquitex pour faire la lave, qui devient transparente en séchant. A cette étape, j'ai opté pour la colorisation en surface du gel et non le mélange de peinture avec le gel. Le but était d'avoir la source de lave qui jaillit de la bouche. Une fois tout ceci sec, on passe à la couleur, du rouge, du orange, du jaune, du blanc et des encres. On soupoudre encore un peu de poudre de fer sur le crâne, deux évents avec de la fumée qui sort en guise de cornes et le socle est prêt!



-----



Hello everyone,



Today, the demonic base. So nothing too complicated but a lot of time because of the different tests. First things first, the base molding 40 mm, small black paint hang on. Then the creation of the skull with miliput and parallel drill hole to the location of the battery and the LED. The next step was to establish under the base neodymium magnets for a magnetic field. A little iron powder which soupoudre over and now full of spikes appear. Then they have to put up a bit, add a little powder here and there, and voila. And it was at that point that we said but if you remove the magnets, bye bye spades hiiii ... yes exactly! That's why it is necessary to remove superglue or plastic glue carefully to not entrecoller spades. This site completed, we move to the implementation of the skull and the incorporation of LED (led oscillating recovered from a candle), glue it all. Followed by addition of Liquitex gel for the washing, which dries clear. The goal is to have the source of lava that flows from the mouth. At this stage, I opted for coloring the surface of the gel, not the paint mixing with the gel. Once this is dry, we go to color, red, orange, yellow, white and inks. We still soupoudre some iron powder on the skull, two vents with smoke coming out as a horn and the base is ready!




[Image: _DSC3729.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3732.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3733.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3736.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3738.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3783.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">Sur celle-ci, on voit bien la Led donnant l'effet lave.


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">Pour conclure, la vidéo



Comme indiqué sur ton blog :

SENSATIONNEL !!! 0_0

T'es un challenger hyper dangereux toi !! ^^

Bon je sens que je vais devoir t'envoyer un Oniwaban pour m'assurer une bonne place. Propre, rapide, silencieux. La classe et le professionnalisme du Clan Mori quoi ^^

Excellente l'idée de la LED ^^

Serviteur,

Morikun

Merci, merci! Mais ton oniwaban se fera trancher direct en arrivant! hiii

[Image: _DSC3802.JPG]

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">Hello, Winter is coming... ah non c'est juste le socle hivernal qui se pointe par 15° à l'extérieur. Y'a plus de saison comme dirait un ancien!


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">Pour faire simple, vous l'aurez compris en voyant la photo! l'idée était de faire une boule à neige avec un socle de 40mm et une ampoule que j'ai coupé en intégrant la figurine dedans avec la neige qui va bien!


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">-----


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">Hello, Winter is coming ... oh no it's just winter base that advanced by 15 ° to the outside. There's more to paraphrase a former season!


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">Basically, you will have understood by seeing the picture! the idea was to make a snow globe with a 40mm socket and a light bulb that I cut the figure by integrating in with the snow that is fine!


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2348.JPG]


Alors voilà l'ampoule


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2355.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

Un fil de laine, de lin imbibé dans d'alcool à brûler entourant l'ampoule à l'endroit où vous souhaitez la couper. On prépare une bassine d'eau froide, on allume le fil, on fait bien brûler tout l'alcool en tournant l'ampoule sur son axe horizontal et on la plonge dans la bassine. Choc thermique, l'ampoule se sectionne et le tour est joué. Reste ensuite à poncer au papier pour récupérer la même hauteur partout. Et oui elle ne se casse pas forcément sur une ligne parfaitement droite.


-----



A woolen yarn, linen soaked in methylated spirits surrounding the bulb to where you want to cut. A cold bucket of water is prepared, we light the wire, it does well burn all the alcohol by turning the bulb on its horizontal axis and it is immersed in the basin. Thermal shock, the bulb severs and voila. Then remains to sand paper to get the same height everywhere. And yes it does not break necessarily on a perfectly straight line.



[Image: IMG_2356.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2399.JPG]


Un essai pour avoir une idée de ce que ça pourrait donner / Try to see



<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2471.JPG]


La figurine prête sur son socle, illustrant cette charmante demoiselle sur le rebord en pierre devant une partie du lac gelé par le froid.


-----


The miniature ready on its base, illustrating this charming young lady on the stone ledge in front of a part of the lake frozen by the cold.



<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2472.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2484.JPG]


Le matériel pour remplir la boule à neige, une seringue, de l'eau déminéralisé pour éviter le jaunissement, et de la glycérine pour faire tomber les flocons moins vite.



<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2483.JPG]



J'ai utilisé du silicone pour jointer le socle et l'ampoule. Ce n'est pas forcément la meilleure solution,


il existe différentes colles pour ce genre d'utilisation; mais ça tient sans aucun soucis. Et sur la photo...l'injection!




<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3801.JPG]


Le résultat!



<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3802.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3803.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3804.JPG]


Oh, il neige à l'intérieur... /
Its snowing inside...



<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3805.JPG]



Voilà, ce fut un bon défi. Ca m'as pris un peu de temps, pas mal d'essais et de réflexion, mais je suis satisfait du résultat. Si vous avez des questions; n'hésitez pas à me demander.


-----



Well, it was a good challenge. That took me a little time, a lot of trial and reflection, but I'm satisfied of the result. If you have any questions; do not hesitate to ask me.




Et la vidéo alors...!




[Image: _DSC3790.JPG]

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">Pour conclure ce concours des 100000, voici le socle futuriste.


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">Un socle qui a demandé du temps et de la réflexion aussi. Il a fallu trouver la bonne vitesse de rotation, le bon assemblage et que ça envoie du bois...


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2321.JPG]


Perçage et préparation des emplacements de la pile et du moteur. Le socle est un socle d'essai et pas le socle final.



<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2322.JPG]


Incorporation de la pile



<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: IMG_2324.JPG]


Premier essai du moteur



Vous l'aurez compris aisément, j'ai voulu faire un radar! Pour cela, il m'as fallu une grille de plastifieuse au rebut (passé au marteau à panne ronde), un petit moteur, un socle, une pile 3v, quelques gaines de câbles électriques et du temps. Pour le socle, rien à dire, c'est du 40mm moulé comme les autres du concours et percé pour accueillir la pile et le moteur. Ensuite on passe au trottoir fait en milliput avec ajout d'une texture faite de petits ronds. Tout simplement la grille de radar que j'ai apposé sur le trottoir. J'aurais pu utiliser la structure en nid d'abeille comme sur la majeure partie des socles futuristes mais pas envie! J'ai gardé quelques codes couleurs quand même, le jaune pour le trottoir mais pas rayé en noir parce que ba pas envie non plus. Le blanc du trottoir a pris du jaune du rebord, normale avec le temps. Quelques vieillissements et traces ici et là.


La route est en papier à poncer, passé en noir et passage de lavis gris. Le gros "04" est en papier autocollant peint en jaune brut un peu détérioré avec le temps. Le châssis du radar est recouvert de circuits imprimés provenant d'une bande Led et enfin les gaines rouges sont issues de différents câbles électriques. La grille du radar est coloré à l'aide d'un marqueur industriel Gold et enfin l'antenne du radar et faite avec une partie en verre de l'ampoule qui se cache dans le culot. (rien ne se perd tout se recycle mon brave). Elle a été enchâssé sur la tige métallique qui lie la grille du radar au moteur. Ce morceau de verre a été collé avec du gel Liquitex pour donné un effet de petites bulles, comme si il y avait un fluide spécifique à l'intérieur.


-----



You will understand easily, I wanted to do a radar! For this, it took me as a grid of laminator Disposal (passed ball peen hammer), a small motor, a base, a 3V battery, few sheaths of electric cables and time. For the base, nothing to say, it's 40mm molded like other contest and drilled to accommodate the battery and motor. Then we go to the sidewalk milliput made with the addition of a texture made of small round. Simply radar grid that I placed on the sidewalk. I could have used the honeycomb structure as the most futuristic bases but not fancy! I kept still some color codes, yellow for the sidewalk but not striped black because ba not want either.


The road is sandpaper past black and gray wash passage. The big "04" plain paper is painted yellow sticker slightly deteriorated with time. The frame is covered with radar circuit from an LED strip and finally the red sheaths are from various electrical cables. The gate of the radar is colored with a marker Gold Industrial and finally the radar antenna and made with a glass part of the bulb hidden in the base. (nothing is lost everything is recycled my brave). It was enshrined in the metal rod that connects the gate of the radar to the engine. This piece of glass was adhered with Liquitex gel gave a small bubble effect, as if there was a specific fluid on the inside.



<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3784.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3789.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3790.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3791.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3792.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3793.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3794.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3796.JPG]


<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: _DSC3797.JPG]



Pour le final, je trouve quand même que ça claque bien, et sur une table de jeu, pas de doutes, la classe! Un bon défi aussi, je pousserais sûrement plus loin sur un socle de taille supérieur ou sur un diorama de type Infinity.



Et pour la dernière fois de ce concours, la vidéo!



<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">


Merci de m'avoir lu et à bientôt pour un autre concours!



Et bien dit donc les idées fusent par ici, c'est impressionnant :O .

Et en plus c'est bien réalisé.


Citation :<div>
Et bien dit donc les idées fusent par ici, c'est impressionnant :O .

Et en plus c'est bien réalisé.

</div>
Et bien merci à toi!


Ton socle boule de neige oO il est juste génial, je suis resté scotché devant pendant 10 min :D

Les autres ne sont pas en reste, mais un grand bravo à toi pour ton imagination et ton savoir faire dans la réalisation, IMPRESSIONNANT!!!


Citation :Ton socle boule de neige oO il est juste génial, je suis resté scotché devant pendant 10 min :D

Les autres ne sont pas en reste, mais un grand bravo à toi pour ton imagination et ton savoir faire dans la réalisation, IMPRESSIONNANT!!!
merci,,merci, je constate avec plaisir que ce socle plait à pas mal de monde!

tu n'es pas en reste non plus en terme de réalisation avec ton Hive tyrant ailé bleu!!





<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

<p style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">[Image: logo%2Bdaedaloom.png]


<div style="color:rgb(0,0,0);font-family:'-webkit-standard';text-align:center;">

Bonjour à tous,


Aujourd'hui, il y a du soleil et une bonne nouvelle. Après quelques petits retards, j'ai reçu mon pion gagné sur le concours de Morikun. Petite précision, laurent Bony de chez Daedaloom m'as envoyé un mail hier pour me dire que le pion venait de partir. Et hop, ce matin 11h, surprise dans la boîte aux lettres, le pion est arrivé!!!. Nombres d'entre nous ont pu apprécier la rapidité de la poste!!! mais ce coup-ci, c'est du lourd!! Bref, j'en profite pour faire un peu de pub et dire que la qualité est au RDV, le service et la disponibilité Top. J'ajouterais pour conclure, que sur leur boutique Etsy Daedaloom vous pouvez profitez de 20% de réduction jusqu'au 15 février 2016 avec le code FANSOLD.




See ya


<div>
</div>

</div>